Lenze 931E/K Small Drives Control - Manual (Page 80)

Commissioning
Course program
Creating the course programs
5
l
80 SW−HB 13.0002−EN 4.1
signal is evaluated, the following actions will follow:
ƒ The current positioning process, if any, will be interrupted. The drive will decelerate
along the set deceleration ramp. As soon as the stop signal changes to HIGH again,
positioning will be continued.
ƒ The position branch will not be executed. The program will stop in the current
program line.
ƒ The edge evaluation of the signals NEXT1 and NEXT2 will even be continued, if the
stop signal is active.
ƒ The outputs DOUT1 and DOUT2 will not be influenced by the stop signal.