Westermo GDW-11 - Manual (Page 11)

General commands 11 6615-2220
+CPOF – Power down modem software
Description:
This command stops the GSM software stack as well as the hardware layer. The
AT+CFUN=0 command is equivalent to +CPOF. After AT+CPOF=1, the modem will not
respond to AT commands. To reset it, use the hard reset.
Syntax:
AT+CPOF
Parameters:
No parameters
Command example Possible responses Note
AT+CPOF OK Command valid
AT+CPOF=1 OK Command valid