Westermo GDW-11 - Manual (Page 342)

342 Examples 6615-2220
Example of a call forwarding
Example 1, When the ME is powered on and the SIM PIN has been entered.
Command example Possible responses Note
AT+CMEE=1 OK Enable the report mobile
equipment errors
AT+CCFC=1,3,”0607492638” OK Register to a call forward-
ing when ME is busy
AT+CCFC=2,3,”014 +CME ERROR: 30 Register to a call forward-
9293031”,129 ing when it does answer,
No network service
AT+CCFC=1,2 +CCFC: 1,1,”+33607492638”,145 Interrogate, Call forwarding
active for a voice call.
AT+CCFC=1,4 OK Delete call forwarding
ME busy
Example of a multiparty call
Example 1, When the ME is powered on and the SIM PIN has been entered.
Command example Possible responses Note
AT+CMEE=1 OK Enable the report mobile
equipment errors
AT+WIND=63 OK Ask to display the general
indications
AT+CCWA=1,1 OK Enable call waiting.
ATD>”John Panborn”; +WIND: 5,1 Indication of call
+WIND: 2 Remote party is ringing
OK Call setup was successful
...Conversation (call1)...
+WIND: 5,2 Indication of another call.
+CCWA: “+33595984834”, Another call is waiting
145,”Dolores Claiborne”
AT+CHLD=2 OK Put first call on hold and
answer the second one.
...Conversation (call2)...
AT+CHLD=3 OK Every call is part of a multi-
party conversation.
AT+CHLD=11 OK Release the first call (with
John Panborn) and recover
the second call (with
Dolores Claiborne)
...Conversation (call2)...
ATH OK Release the second call.