Westermo GDW-11 - Manual (Page 153)

Fax commands 153 6615-2220
+FCQ – Copy quality checking
Description:
This command controls Copy Quality checking for receiving faxes.
Syntax:
AT+FCQ=<n>
Parameters:
<n>
0: default value, the only supported
Command example Possible responses Note
AT+FCQ=? (0) Test command
OK
+FCR – Capability to receive
Description:
This commands controls the capability of the modem to accept incoming faxes.
Syntax:
AT+FCR=<n>
Parameters:
<n>
0: The modem will not accept incoming faxes.
1: The modem will accept incoming faxes (default value).
Command example Possible responses Note
AT+FCR=? (0,1) Test command
OK