Westermo GDW-11 - Manual (Page 257)

Callback security commands – only in GDW-12 257 6615-2220
Command example Possible responses Note
AT*WCB=2 OK Callback enabled
AT*WCB? *WCB: 2 Check current value
OK
*WCBPWD – callback/secure access password
Description:
This command is used to store the password used in the callback and the secure access
functionality.
Three different passwords can be stored.
Syntax:
AT*WCBPWD1=<pwd>
AT*WCBPWD2=<pwd>
AT*WCBPWD3=<pwd>
Parameters:
<pwd>
The password may contain any writable character. The maximum number of characters is
20.
See also the following commands: *wcbtab, *wcb, capawcbtime
Command example Possible responses Note
AT*WCBPWD1=qwerty OK Set password no 1
AT*WCBPWD2=asdfgh OK Set password no 2
AT*WCBPWD3=zxcvbnm OK Set password no 3
AT*WCBPWD1? *WCBPWD1: qwerty Current value
AT*WCBPWD3=- OK Delete the password