Westermo GDW-11 - Manual (Page 268)

AT*WGPRSDISCONNECT – Disconnects active GPRS PDP context
Description:
This command disconnects an active GRPS PDP context previously activated with
AT*WGPRSCONNECT.
The AT*WTCPI=1 command gives more detailed information about the commands
execution status.
Syntax:
AT*WGPRSDISCONNECT
Command example Possible responses Note
AT*WGPRSDISCONNECT OK Disables the GPRS context
AT*WTCPSTART – Activates a TCP session
Description:
Activates a TCP session according to the TCP parameters listed by the *WTCPV com-
mand. The unit can act as a TCP server or a client according to the TCP parameters.
A precondition for this command is that a successful *WGPRSCONNECT has been
executed.
The TCP session is a service that requires the underlaying GPRS PDP context to be
active.
To interrupt an active TCP session and to enter command mode again, the user have to
send the escape sequence ’+++’ to the modem.
The AT*WTCPI=1 command gives more detailed information about the commands
execution status.
Syntax:
AT*WTCPSTART
Command example Possible responses Note
AT*WTCPSTART OK Start a TCP session
268 TCP SOCKET AUTOCONNECT Commands 6615-2220