Westermo GDW-11 - Manual (Page 32)

32 Call Control commands 6615-2220
+CSNS – Single Numbering Scheme
Description:
This command selects the bearer to be used when an MT single numbering scheme call
is set up (see +CICB).
NOTE: setting the +CSNS command affects the current value of +CICB.
Syntax:
AT+CSNS=<mode>
Parameters:
<mode>
0: Voice
2: Fax
4: Data
Command example Possible responses Note
AT+CSNS=2 OK Force a fax call
AT+CSNS=0 OK Force a voice call
AT+CSNS? +CSNS: 0 Interrogate value, incoming
bearer: voice call
AT+CSNS=? +CSNS: (0,2,4) Test command,-Voice, data
or fax default incoming
bearer