Westermo GDW-11 - Manual (Page 147)

Fax commands 147 6615-2220
+FRM – Receive speed
Description:
This command sets the fax receive speed.
Syntax:
AT+FRM=<speed>
Parameters:
The speed values are identical to those of the +FTM command (see 0).
Command example Possible responses Note
AT+FRM=? (24,48,72,73,74,96,97,98, Test command
121,122,145,146) Fax 14.4 kbit/s supported
OK
+FTH – HDLC transmit speed
Description:
This command sets the fax transmit speed, using the HDLC protocol.
Syntax:
AT+FTH=<speed>
Parameters:
<speed>
3: V.21 channels 300 bit/s.
Command example Possible responses Note
AT+FTH=? +FTH: (3)
OK Test command