Westermo GDW-11 - Manual (Page 93)

Short Messages commands 93 6615-2220
+CMGR – Read message
Description:
This command allows the application to read stored messages. The messages are read
from the memory selected by +CPMS command.
Syntax.
AT+CMGR=<index>
Response syntax for text mode:
for SMS-DELIVER only
+CMGR:<stat>,<oa>[,<alpha>], <scts> [,<tooa>,<fo>, <pid>, <dcs>, <sca>, <tosca>,
<length>] <CR><LF> <data>
for SMS-SUBMIT only
+CMGR: <stat>,<da>[,<alpha>] [,<toda>, <fo>, <pid>, <dcs>, [<vp>], <sca>, <tosca>,
<length>]<CR><LF> <data>
for SMS-STATUS-REPORT only
+CMGR: <stat>,<fo>,<mr>[,<ra>][,<tora>],<scts>,<dt>,<st> ()
Response syntax for PDU mode:
+CMGR: <stat> [,<alpha>] ,<length> <CR><LF> <pdu>
Parameters:
See table in beginning of section “short messages commands”
NOTE:
A message read with status “REC UNREAD” will be updated in memory with the status
“REC READ”.
The <stat> parameter for SMS Status Reports is always “READ”.