Westermo GDW-11 - Manual (Page 156)

156 Fax commands 6615-2220
+FDCC – DCE capabilities parameters
Description:
This command allows the DTE to parameter the capabilities used for any session.
Syntax:
AT+FDCC=<vr>,<br>,<wd>,<ln>,<df>,<ec>,<bf>,<st>
Parameters:
The parameters and default values are the same as for the +FDIS command (see.
Command example Possible responses Note
AT+ FDCC=? (0,1),(0-5),(0-2),(0-2),(0-3), Test command
(0-2),(0),(0-7) Fax ECM supported,
OK Fax 14,4 kbit/s supported
AT+ FDCC=? (0,1),(0-5),(0-2),(0-2),(0-3), Test command
(0),(0),(0-7) Fax ECM not supported,
OK Fax 14,4 kbit/s supported
AT+ FDCC=? (0,1),(0-3),(0-2),(0-2),(0-3), Test command
(0-2),(0),(0-7) Fax ECM supported,
OK Fax 14,4 kbit/s not
supported
AT+ FDCC=? (0,1),(0-3),(0-2),(0-2),(0-3), Test command
(0),(0),(0-7) Fax ECM not supported,
OK Fax 14,4 kbit/s not
supported
+FLID – Local ID string
Description:
This command allows the local ID string to be defined.
Syntax:
AT+FLID=”<string>”
Parameters:
<string>
The string has a limited size of 20 characters, and accepts any characters between 32 and
127 as ASCII codes..
Command example Possible responses Note
AT+FLID=? (20),(32-127) Test command
OK