Stin, +stril – sim toolkit indication – Westermo GDW-11 User Manual
Page 279
SIM TOOLKIT COMMANDS 279
6615-2220
+STIN, +STRIL – SIM ToolKit Indication
Description:
Unsolicited result code.
In order to allow the customer application to identify the pro-active command sent via
SIM ToolKit, a mechanism of unsolicited SIM ToolKit indications (+STIN) is implemented.
Syntax:
+STIN: <CmdType>
Parameters:
<CmdType>
0:
a ‘Setup Menu’ pro-active command has been sent from the SIM.
1:
a ‘Display Text’ pro-active command has been sent from the SIM.
2:
a ‘Get Inkey’ pro-active command has been sent from the SIM.
3:
a ‘Get Input’ pro-active command has been sent from the SIM.
4:
a ‘Setup Call’ pro-active command has been sent from the SIM.
5:
a ‘Play Tone’ pro-active command has been sent from the SIM. (*)
6:
a ‘Sel Item’ pro-active command has been sent from the SIM.
7:
a ‘Refresh’ pro-active command has been sent from the SIM. (*)
8:
a ‘Send SS’ pro-active command has been sent from the SIM. (*)
9:
a ‘Send SMS’ pro-active command has been sent from the SIM. (*)
10: a ‘Send USSD’ pro-active command has been sent from the SIM. (*)
11: a ‘SETUP EVENT LIST’ pro-active command has been sent from the SIM.
93: a ‘SMS-PP Data Download’ failed due to SIM BUSY
94: a ‘SMS-PP Data Download’ failed due to SIM ERROR
98: a timeout when no response from user.
99: a “End Session” has been sent from the SIM.
(*) if the automatic response parameter is activated, this indication is followed by the
corresponding +STGI response.
If the customer application needs to exchange SIM Toolkit message directly with the SIM
card, the second indication (+STRIL) give the full command string given by the SIM.
Syntax:
+STRIL: <CmdTreated>,<Command string>