Westermo GDW-11 - Manual (Page 205)

Specific AT commands 205 6615-2220
+WLOC – Location information
Description:
This command can be used by the application to retrieve the following local information:
MCC-MNC, LAC, CI, Network measurement, BCCH channel list, Timing Advance, Date
and Time.
Two ways exist for the external application to get these information: on request of
the application, or automatically by the modem every x seconds (x has to be a multiple
of 5 different from 0).
The location feature has to be activated to get information.
if the feature is not activated, ”ERROR” is sent.
If the data are not valid at the requested time, the network measurement, BCCH list
and Timing Advance cannot be displayed (“,,” is displayed instead).
Syntax:
AT+WLOC =< mode > [,< time period/dump >]
Response Syntax:
AT+WLOC?
+WLOC: <mode>,<timeperiod>,<dump>
Parameters:
<mode>
0: Stop automatic shots
1: One shot requested
2: Automatic shots requested (every x seconds)
3: Configuration of the wished information
for <mode> = 2:
<time period>
(Optional parameter) range: [5 – 255] in seconds it has to be a multiple of 5.
Default value of time period: 5 seconds
The automatic mode for location is saved in EEPROM, so will be taken into account
after an Init (+WLOC: . . . will be displayed).
Coding of the response to AT+WLOC=1 or AT+WLOC=2:
The format of these fields is as specified in 04.08: