Westermo GDW-11 - Manual (Page 145)

Data commands 145 6615-2220
\N – Select data error correcting mode
Description:
This command controls the preferred error correcting mode for a data connection, if the
feature is provided by the product. It can only be used for transparent data transmission.
If the MNP2 feature is provided, the product authorizes MNP error correction mode.
Syntax:
AT\N<n>
Parameters:
<n>
0: Disables error correction mode (default value)
5: Selects MNP error correction mode
NOTE:
+E prefixed commands of V.25 ter are not used.
Command example Possible responses Note
AT\N0 OK no error correction
AT\N? 0 Current value
OK
AT\N4 +CME ERROR: 3 Invalid paramter