Westermo GDW-11 - Manual (Page 241)

GPRS commands 241 6615-2220
+CR – Service reporting control
Description:
This command enables a more detailed service reporting, in case of data incoming or
outgoing call. Before sending the CONNECT response to the application, the modem
will precise the type of data connection that have been established.
These report types are:
+CR: ASYNC For asynchronous transparent
+CR: REL ASYNC For asynchronous non-transparent
+CR: GPRS For GPRS
Syntax:
AT+CR=<mode>
Parameters:
<mode>
0: disable extended reports
1: enable extended reports
Command example Possible responses Note
AT+CR=0 OK Extended reports disabled
AT+CR=1 OK Extended reports enabled