Westermo GDW-11 - Manual (Page 238)

238 GPRS commands 6615-2220
Syntax:
+CGANS=[<response>, [<cid>]]
Response Syntax:
AT+CGANS=?
+CGANS: (list of supported <response>s), (list of supported <L2P>s)
Parameters:
<response>
Is a numeric parameter which specifies how the request should be responded to.
0: reject the request
1: accept and request that the PDP context be activated
If <response> is omitted it is assumed to be 0. Other values are reserved and will result
in the ERROR response.
<cid>
A numeric parameter which specifies a particular PDP context definition.
Command example Possible responses Note
+CRING: GPRS "IP",
"122.41.74.238"
AT+CGANS=1 CONNECT
AT+CGANS=? +CGANS: (0-1)
OK