Westermo GDW-11 - Manual (Page 308)

308 Appendixes 6615-2220
Final result codes
Verbose Numeric (V0 set) Description
result code
+CME ERROR: <err> As verbose Error from GSM 07.05 commands
+CMS ERROR: <err> As verbose Error from SMS commands (07.07)
BUSY 7 Busy signal detected
ERROR 4 Command not accepted
NO ANSWER 8 Connection completion timeout
NO CARRIER 3 Connection terminated
OK 0 Acknowledges correct execution of
a command line
RING 2 Incoming call signal from network
Intermediate result codes
Verbose Numeric (V0 set) Description
result code
+COLP:<number>, as verbose Outgoing Call Presentation
<type>
+CR: <type> as verbose Outgoing Call report control
+ILRR: <rate> as verbose Local TA-TE data rate
CONNECT 300 10 Data connection at 300 bauds
CONNECT 1200 11 Data connection at 1200 bauds
CONNECT 1200/75 12 Data connection at 1200/75 bauds
CONNECT 2400 13 Data connection at 2400 bauds
CONNECT 4800 14 Data connection at 4800 bauds
CONNECT 9600 15 Data connection at 9600 bauds
CONNECT 14400 16 Data connection at 14400 bauds
+CSSI: <code1> As verbose Supplementary service notification
[,<index>] during a call setup