Westermo GDW-11 - Manual (Page 174)

174 Specific AT commands 6615-2220
NOTE:
… The response for the requested dump 1, 2 and 4 will be:
+CCED:<value1>, . . . , <valuen>
OK
where <value> is the ASCII string of the values (in decimal form except the LAC
and CI values which are in hexadecimal form) of the parameters. If a field cannot be
measured – or is meaningless – the parameter is not filled in, and two consecutive
commas are sent.
… The response for the requested dump 8 will be a +CSQ response and not a
+CCED response. The 07.07 format for +CSQ is respected. The <ber> is not evalu-
ated by this command, so the <ber> value will always be 99.
+CSQ:<rssi>, 99
OK
When automatic shots are selected, this +CSQ response is sent every time the
<rssi> measured by the product changes. Automatic shots are supported in idle
mode and during communication. The activation or deactivation of this flow (8)
does not affect the other flows.
… In idle mode, only RxLev measurements (on the main cell and on the neighboring
cells) are made.
… Combination of the requested dump is supported (addition of the values 1, 2, 4
and 8):
<Value>
1: +CCED response: Main Cell only
2: +CCED response: Neighbors 1 to 6
3: +CCED response: Main Cell, then Neighbors 1 to 6
4: +CCED response: Timing Advance only
5: +CCED response: Main Cell, then Timing Advance
6: +CCED response: Neighbors 1 to 6, then Timing Advance
7: +CCED response: Main Cell, then its Timing Advance, then Neighbors 1 to 6, with
each Timing Advance inserted between cells results
8: +CSQ response: Main Cell RSSI indications
9: +CSQ response, then +CCED response with Main Cell only
10: +CSQ response, then +CCED response with Neighbors 1 to 6
11: +CSQ response, then +CCED response with Main Cell, then Neighbors 1 to 6
12: +CSQ response, then +CCED response with Timing Advance only
13: +CSQ response, then +CCED response with Main Cell, then Timing Advance
14: +CSQ response, then +CCED response with Neighbors 1 to 6, then Timing
Advance
15: +CSQ response, then +CCED response with Main Cell, then its Timing Advance,
then Neighbors 1 to 6, with each Timing Advance inserted between cells results