Westermo GDW-11 - Manual (Page 247)

I/O commands – only in GDW-12 247 6615-2220
*WIOE – Generic I/O enable
Description:
This command enables / disables remote I/O access.
Syntax:
AT*WIOE=<val>
AT*WIOE=?
AT*WIOE?
Parameters:
<val>
Value of the enable parameter [0-1].
Enable = 1 and Disable =0
Command example Possible responses Note
AT*WIOE=1 OK Enable remote I/O
AT*WIOE=0 OK Disable remote I/O
AT*WIOE=? *WIOE: (0-1) Request the format string
OK
AT*WIOE? *WIOE=1 Remote I/O enabled
OK
Request the format string
AT*WIOE=?
*WIOE:
(0-1)
OK