Westermo GDW-11 - Manual (Page 256)

256 Callback security commands – only in GDW-12 6615-2220
Callback security commands – only in GDW-12
*WCB – Callback security
Description:
The callback functionality makes the established link more secure. After an incoming call
the adapter will make a callback to either a preconfigured number or to the incoming
number. The callback can be protected by a password. The modem can also be configured
for a secure access without callback.
If the password is enabled, the calling part will be prompted for the password directly
after connection. When the password is entered correctly, the adapter will disconnect
the current link and make a callback after a preconfigured number of seconds (configura-
tor command: capa*wcbtime [default 3]).
If the modem is configured as ”secure access”, it will allow data only after the password
is correctly entered.
After 3 retries of entering wrong password or after 60 seconds, the link will be discon-
nected and the callback/secure access aborted.
The number to callback must be entered in the wcbtab number table (*wcbtab1, *wcb-
tab2 or *wcbtab3).
The passwords is stored in: *wcbpwd1, *wcbpwd2 or *wcbpwd3.
When making a callback to a number stored in *wcbtab, the password in *wcbpwd1 is
connected to the number in *wcbtab1 (and *wcbpwd2 to *wcbtab2 and *wcbpwd3 to
*wcbtab3)
Syntax:
AT*WCB=<callback control>
Parameters:
<callback control>
0: callback disabled (default)
1: callback enabled, No password needed, callback number only in position1 in *wcb-
tab (catab1)
2: callback enabled, No password needed, callback to incoming number
3: access security enabled, Password in one or more positions in cbpwdx (x= 1,2 or 3)
4: callback enabled, Password in one or more positions in *wcbpwdx (x= 1,2 or 3),
callback to number in *WCBTIMEn, (*wcbpwd1 corresponds to *wcbtab1. . .)
5: callback enabled, Password in one or more positions in *wcbpwdx (x= 1,2 or 3),
callback to incoming number
6: callback enabled, Password in one or more positions in *wcbpwdx (x= 1,2 or 3),
callback to number that is entered after password check is OK.
See also the following commands: *wcbtab, *wcbpwd, capawcbtime.