Westermo GDW-11 - Manual (Page 151)

Fax commands 151 6615-2220
+FET – Transmit page punctuation
Description:
This command punctuates page and document transmission after the +FDT command. It
indicates that the current page is complete, and if there are additional pages to send.
Syntax:
AT+FET=<ppm>
The remote station should respond with +FPTS:<ppr>
Parameters:
<ppm>
0: Another page next, same document
1: Another document next
2: No more pages or documents
3: Another partial page next
4: Another page, procedure interrupt
5: Another document, procedure interrupt
6: All done, procedure interrupt
+FPTS – Page transfer status parameters
Description:
This command sets post page transfer response.
Syntax:
AT+FPTS=<ppr>
Parameters:
<ppr>
1: Page good
2: Page bad; retry requested
3: Page good; retrain requested
4: Page bad; interrupt requested
5: Page good; interrupt requested
+FK – Terminate Session
Description:
This command causes the product to terminate the session.
Syntax:
AT+FK
Parameters:
No parameter