I – request identification information – Westermo GDW-11 User Manual
Page 171
V.24-V.25 commands 171
6615-2220
I – Request identification information
Description:
This command causes the product to transmit one or more lines of specific information text.
Syntax:
ATI<n>
Parameters:
<n>
0:
Display manufacturer followed by model identification. (equivalent to +CGMI and
+CGMM, refer to these commands for more precisions).
3:
Display revision identification (equivalent to +CGMR).
4:
Display modem configuration in RAM (equivalent to &V0).
5:
Display modem configuration in EEPROM (equivalent to &V1).
6:
Display modem data features. Lists the supported data rates, data modes, and fax
classes.
7:
Display modem voice features.
9: Display
revision
identification
Other values: “OK” string is sent back.
Command example
Possible responses
Note
ATI0
WESTERMO MODEM
Manufacturer and model
900P identifications
OK
ATI3 440_09gm.Q2406A
Revision
identification
1266500 020503 17:06
Software release 4.40,
OK
generated on the 05th of
February
2003
ATI6
DATA RATES:
Modem data features
AUTOBAUD,300,1200,
1200/75,2400,4800,9600,14400
DATA
MODES:
T/NT,
ASYNCHRONOUS
FAX CLASS 1,2
OK
ATI7
SPEECH CODINGS:
Modem voice features
FR,EFR,HR,AMR
OK
ATI8
Switch1: 0000
Switch settings for
GDW-11
ATI8
Switch1: 0000
Switch settings for
Switch2: 00000000
GDW-12
Switch3:
00000000
ATI9
4100-xxxx
Westermo SW release