Westermo GDW-11 - Manual (Page 167)

V.24-V.25 commands 167 6615-2220
V – DCE response format
Description:
This command determines whether the DCE response format uses or not the header
characters <CR><LF>, and the result codes are provided as numeric or verbose.
Syntax:
ATV<n>
Parameters:
<n>
0 (Information responses): <text><CR><LF>
0 (Result codes): <numeric code><CR>
1 (Information responses): <CR><LF><text><CR><LF>
1 (Result codes): <CR><LF><verbose code><CR><LF>
Command example Possible responses Note
ATV0 0 DCE transmits limited
headers and trailers and
numeric result codes
ATV1 OK DCE transmits full headers
and trailers and verbose
response text
Z – Default configuration
Description:
This command restores the configuration profile. Any call is released.
Syntax:
ATZ
Parameters:
No parameter
Command example Possible responses Note
ATZ OK Command valid