Westermo GDW-11 - Manual (Page 194)

194 Specific AT commands 6615-2220
<precision>
only used if <Mode>=2 and <FctId>= 5 to 7
if <FctId>=5, this field is <type format> (See +WNON)
if <FctId>=6, this field is <data field> (See +WCPI)
if <FctId>=7, this field is <service> (See +WCSP)
<Status>
0: CPHS feature disabled
1: CPHS feature enabled
Command example Possible responses Note
AT+CPHS? +CPHS: 1,0 Interrogate the status of
+CPHS: 2,0 CPHS functionality
+CPHS: 3,1 The voice mail indicator
+CPHS: 4,0 functionality is deactivated
+CPHS: 5,1 The mail box number
+CPHS: 6,1 functionality is deactivated
+CPHS: 7,1 The Alternate Line Service
OK functionality is activated
The Divert Call Indicator
functionality is deactivated
The Network Operator
Name functionality is
activated
The CPHS Information
functionality is activated
The Customer Service
Profile functionality is
activated
AT+CPHS=3.1 +CME ERROR: 3 Syntax error
AT+CPHS=1.1 OK Activate the voice mail
indicator functionality