Westermo GDW-11 - Manual (Page 82)

82 Short Messages commands 6615-2220
Short Messages commands
Parameters definition
<da> Destination Address, coded like GSM 03.40 TP-DA
<dcs> Data Coding Scheme, coded like in document [5].
<dt> Discharge Time in string format: “yy/MM/dd,hh:mm:ssÍzz”(Year [00-99],
Month [01-12], Day [01-31], Hour, Minute, Second and Time Zone [quarters
of an hour] ). Years range is [2000-2099]
<fo> First Byte, coded like SMS-SUBMIT first byte in document [4], default value is
17 for SMS-SUBMIT
<index> Place of storage in memory.
<length> Text mode (+CMGF=1): number of characters
PDU mode (+CMGF=0): length of the TP data unit in bytes
<mem1> Memory used to list, read and delete messages (+CMGL, +CMGR and
+CMGD).
<mem2> Memory used to write and send messages (+CMGW, +CMSS).
<mem3> Preferred memory to which received SMS are to be stored
<mid> CBM Message Identifier.
<mr> Message Reference.
<oa> Originator Address.
<pid> Protocol Identifier.
<pdu> For SMS: GSM 04.11 SC address followed by GSM 03.40 TPDU in hexadeci-
mal format, coded as specified in doc [4] For CBS: GSM 03.41 TPDU in hexa-
decimal format
<ra> Recipient Address.
<sca> Service Center Address
<scts> Service Center Time Stamp in string format: “yy/MM/dd,hh:mm:ssÍzz” (Year/
Month/Day,Hour:Min:SecondsÍTimeZone)
<sn> CBM Serial Number
<st> Status of a SMS-STATUS-REPORT
<stat> Status of message in memory.
<tooa> Type-of-Address of <oa>.
<tora> Type-of-Address of <ra>.
<tosca> Type-of-Address of <sca>.
<total1> Number of message locations in <mem1>.
<total2> Number of messages locations in <mem2.
<total3> Number of messages locations in <mem3>.
<used1> Total number of messages locations in <mem1>.
<used2> Total number of messages locations in <mem2.
<used3> Total number of messages locations in <mem3>.
<vp> Validity Period of the short message, default value is 167