Westermo GDW-11 - Manual (Page 128)

128 Supplementary Services commands 6615-2220
+CLCC – List current calls
Description:
This command is used to return a list of current calls.
Syntax:
AT+CLCC
Response syntax: (OK if no calls are available)
+CLCC: <id1>, <dir>, <stat>, <mode>, <mpty> [,<number>, <type> [<alpha>]]
+CLCC: <id2>, <dir>, <stat>, <mode>, <mpty> [ ,<number>, <type> [<alpha>]][...]
Parameters:
<idx>
Integer type, call identification as described in GSM 02.30
<dir>
Direction of the call
0: mobile originated (MO) call
1: mobile terminated (MT) call
<stat>
State of the call
0: active
1: held
2: dialing (MO call)
3: alerting (MO call)
4: incoming (MT call)
5: waiting (MT call)
<mode>
Teleservice
0: voice
1: data
2: fax
9: unknown
<mpty>
Multiparty
0: call is not one of multiparty (conference) call parties
1: all is one of multiparty (conference) call parties
<number>
String type phone number in format specified by <type>
<type>
Type of address byte in integer format