Westermo GDW-11 - Manual (Page 16)

16 General commands 6615-2220
+CALA – Alarm Management
Description:
This command is used to set alarms date/time in the ME.
The maximum number of alarms is 16.
Seconds are not taken into account.
Syntax:
AT+CALA=<date and time string> (set alarm)
AT+CALA=””,<index> (delete alarm)
Parameters:
<date and time string> is a string with the following format: “yy/MM/dd,hh:mm:ss”
see +CCLK
<index> is a number from 1 to 16.
Command example Possible responses Note
AT+CALA=”00/06/09, OK Set an alarm for June 9th,
07:30” 2000 at 7:30 am,
Alarm stored
AT+CALA=”99/03/05, +CME ERROR 3 Invalid alarm
13:00:00” (date/time expired)
AT+CALA? +CALA: “00/06/08,15:25:00”,1 List all alarms
+CALA: “00/06/09,07:30:00”,2 Note: three alarms are set
+CALA: “00/06/10,23:59:00”,3 (index 1, 2, 3)
+CALA: “00/06/08,15:25:00”,1 An alarm occurs (index 1)
AT+CALA=””,2 OK Delete alarm index 3
AT+CALA? +CALA: “00/06/09,07:30:00”,1 List all alarms, Only one
alarm (index 2)