Westermo GDW-11 - Manual (Page 50)

50 Security commands 6615-2220
Parameters:
<pin>
Personal Identification Number, 4 digits number.
<puk>
Personal Unblocking Key needed to change the PIN, eight digits number.
Command example Possible responses Note
AT+CPIN=1234 OK Enter PIN, result: PIN code
is correct
AT+CPIN=5678 +CME ERROR : 3 Enter PIN, Operation not
allowed, PIN previously
entered
AT+CPIN=00000000,1234 +CME ERROR: 16 Enter PUK and new PIN,
result: Incorrect PUK
AT+CPIN=12345678,1234 OK Enter PUK and new PIN,
2nd attempt, PUK correct,
new PIN stored
3 failed PIN validations + 1 successful PUK validation:
AT+CPIN? +CPIN: SIM PIN Read the PIN status The
product requires SIM PIN
AT+CPIN=1235 +CME ERROR: 16 First attempt to enter a
SIM PIN, Wrong PIN
AT+CPIN=1236 +CME ERROR: 16 Second attempt, Wrong
PIN
AT+CPIN=1237 +CME ERROR: 16 Third attempt, Wrong PIN
AT+CPIN? +CPIN: SIM PUK Read PIN state, The prod-
uct requires PUK
AT+CPIN=99999999,5678 OK The PUK is entered, the
new PIN shall be 5678 PUK
validation is OK. New Pin is
5678
AT+CPIN? +CPIN: READY Read PIN state, The prod-
uct is ready
If the user tries to do something which requires PIN2 (CHV2), the product will refuse
the action with a “+CME ERROR: 17” (SIM PIN2 required). The product then waits for
SIM PIN2 to be given. Of course, if SIM PIN2 is blocked, SIM PUK2 is required instead of
SIM PIN2. For example, the product needs PIN2 to write in the fixed dialling phonebook
(FDN), so if SIM PIN2 authentication has not been performed during the current session,
SIM PIN2 is required.