Westermo GDW-11 - Manual (Page 213)

GPRS commands 213 6615-2220
GPRS commands
+CGDCONT – Define PDP Context
Description:
This command specifies PDP context parameter values for a PDP context identified by
the local context identification parameter, <cid>.
Four PDP contexts can be defined through WESTERMO software.
A special form of the set command, +CGDCONT= <cid> causes the values for context
number <cid> to become undefined.
The test command returns values supported as a compound value. If the MT supports
several PDP types, <PDP_type>, the parameter value ranges for each <PDP_type> are
returned on a separate line.
The read command returns the current settings for each defined context.
The test command returns values supported as a compound value. If the MT supports
several PDP types, <PDP_type), the parameter value ranges for each <PDP_type> are
returned on a separate line.
Syntax:
AT+CGDCONT=[<cid> [,<PDP_type> [,<APN> [,<PDP_addr> [,<d_comp> [,<h_
comp>]]]]]]
Response Syntax:
AT+CGDCONT?
+CGDCONT: <cid>, <PDP_type>, <APN>,<PDP_addr>, <data_comp>, <head_comp>
[+CGDCONT: <cid>, <PDP_type>, <APN>,<PDP_addr>, <data_comp>, <head_comp>
[...]]
AT+CGDCONT=?
+CGDCONT: (range of supported <cid>s), <PDP_type>,,,(list of supported <d_comp>s),
(list of supported <h_comp>s)
[+CGDCONT: (range of supported <cid>s), <PDP_type>,,,(list of supported <d_
comp>s),(list of supported <h_comp>s)
[...]]