Westermo GDW-11 - Manual (Page 169)

V.24-V.25 commands 169 6615-2220
E – Echo
Description:
This command is used to determine whether the modem echoes characters received by
an external application (DTE) or not.
Syntax:
ATE<n>
Parameters:
<n>
0: Characters are not echoed
1: Characters are echoed
Command example Possible responses Note
ATE0 OK Characters are not echoed
ATE1 OK Characters are echoed
&F – Restore factory settings
Description:
This command is used to restore the factory settings from EEPROM.
It only restores the parameters that can be found in paragraph (Parameters Storage para-
graph) with AT&F column checked. Those parameters are restored in RAM and in E2P,
overwriting the profile set with AT&W.
Syntax:
AT&F[<n>]
Parameters:
<n>
0: restore factory setting
No other value supported
Command example Possible responses Note
AT&F OK Ask for restoring the
factory settings
AT&F0 OK Ask for restoring the
factory settings