Westermo GDW-11 - Manual (Page 140)

140 Data commands 6615-2220
+CRLP – Radio link protocol parameters
Description:
This command modifies the radio link protocol parameters used for non transparent
data transmission.
Syntax:
AT+CRLP= <iws>, <mws>, <T1>, <N2>, <ver>
Parameters:
<iws>
Down window size, (default is 61)
Range 0 to 61
<mws>
Up window size, (default is 61)
Range 0 to 61
<T1>
Acknowledgement timer in units of 10ms, (default is 48)
Range 40 to 255
<N2>
Retransmission attempts, (default is 6),
Range 1 to 255
<ver>
Version number.
0: V42bis is not supported.
1: V42bis is supported
Command example Possible responses Note
AT+CRLP=? +CRLP: (0-61),(0-61), Test command
(40-255),(1,255),(0) V42bis not supported
OK
AT+CRLP=? +CRLP: (0-61),(0-61), Test command
(40-255),(1,255),(0,1) V42bis supported
OK
AT+CRLP=61,61,48,6,0 OK Set new parameters
AT+CRLP? +CRLP: 61,61,48,6,0 Current values