Figure 3.6.2.1. the 4 positions screen, 3 one (1) position screen – Yaskawa PC NC User Manual
Page 116
Advertising
3 - 59
YASNAC PCNC Operating Manual
Chapter 3: HMI Process Operation
edited at any time. The Workpiece frame may only be edited in manual modes (Rapid, Jog, Han-
dle and Step) when the machine is not running.
FIGURE 3.6.2.1. The 4 Positions Screen
3.6.3 One (1) Position Screen
This screen shows one large, non-editable position display. For more information on position dis-
plays, see “Position Display” on page 19.
Advertising