Yaskawa PC NC - Manual (Page 221)

A2 - 10
YASNAC PCNC Operating Manual Appendix 2: Alarm Tables
Alarm
No.
Description
alarm.1092 Battery backed-up memory area total check error has occurred.
alarm.1093 Offset and work coordinate system shift amount area total check error has occurred.
alarm.1094 Macro variable area total check error has occurred.
alarm.1095 Machining program area total check error has occurred.
alarm.1096 Tool life control data area total check error has occurred.
alarm.1098 The Fan is faulty. {Refer to A1-20}
alarm.1099 High temperature in the NC unit. {Refer to A1-20}
alarm.2001 Overtravel has occurred (X-axis).
alarm.2002 Overtravel has occurred (Y-axis).
alarm.2003 Overtravel has occurred (Z-axis).
alarm.2004 Overtravel has occurred (4th-axis).
alarm.2005 Overtravel has occurred (5th-axis).
alarm.2011 Axis has reached the stored stroke limit No. I area (X-axis).
alarm.2012 Axis has reached the stored stroke limit No. I area (Y-axis).
alarm.2013 Axis has reached the stored stroke limit No. I area (Z-axis).
alarm.2014 Axis has reached the stored stroke limit No. I area (4th-axis).
alarm.2015 Axis has reached the stored stroke limit No. I area (5th-axis).
alarm.2020 More than two areas are made valid at the same time among No. 2 - No. 5 areas.
alarm.2021 Axis has reached the outside of the stored stroke limit No. 2 area (X-axis).
alarm.2022 Axis has reached the outside of the stored stroke limit No. 2 area (Y-axis).
alarm.2023 Axis has reached the outside of the stored stroke limit No. 2 area (Z-axis).
alarm.2024 Axis has reached the outside of the stored stroke limit No. 3 area (X-axis).
alarm.2025 Axis has reached the outside of the stored stroke limit No. 3 area (Y-axis).
alarm.2026 Axis has reached the outside of the stored stroke limit No. 3 area (Z-axis).
alarm.2027 Axis has reached the outside of the stored stroke limit No. 4 area (X-axis).
alarm.2028 Axis has reached the outside of the stored stroke limit No. 4 area (Y-axis).
alarm.2029 Axis has reached the outside of the stored stroke limit No. 4 area (Z-axis).
alarm.2031 Axis has reached the outside of the stored stroke limit No. 5 area (X-axis).
alarm.2032 Axis has reached the outside of the stored stroke limit No. 5 area (Y-axis).