Yaskawa PC NC - Manual (Page 39)

2 - 16
YASNAC PCNC Operating Manual Chapter 2: Basic Operation of YASNAC PCNC
2.5 Manual Operation (2)
This section describes manual operations carried out in daily production using the manual
operation functions explained in 2.4 “MANUAL OPERATION (1)“.
2.5.1 Simultaneous 2 or 3-axis Handle Feed *
By installing the pulse handle for the individual axis, it is possible to move up to three axis among
the X-, Y-, Z-,
α
-, and
β
-axis simultaneously. Follow the procedure indicated below.
FIGURE 2.5.1.1: Simultaneous 2 or 3-axis Pulse Handle Feed
€ Select the handle mode by placing the MODE SELECT switch on the machine
operation panel in the HANDLE position.
ó Select the axis feed distance per graduation of the pulse handle with the MANUAL
PULSE MULTIPLY switch on the machine operation panel. This switch is used in
common for the three pulse handles.
ì Turn the pulse handle. The selected axis is moved in the positive or negative direction
according to the handle turning direction.