3 nc switch screen, Figure 3.3.3.1. the nc switch screen – Yaskawa PC NC User Manual
Page 90
3 - 33
YASNAC PCNC Operating Manual
Chapter 3: HMI Process Operation
3.3.3 NC Switch Screen
FIGURE 3.3.3.1. The NC Switch Screen
This is a software version of the CNC pendant panel. See section “Switch Label Screen” on
page 93 for more information on creating and enabling or disabling display of these switches.
Making changes to this screen requires MTB password or higher. For the CNC Switches box,
label text and parameter numbers are fixed, and cannot be edited. However, the Machine
Switches box can be reconfigured. Machine tool builders can reduce the number of machine pen-
dant switches by creating their own software switches on the CNC screen. To make switches,
each switch must have a label, output keep relay address and LED output keep relay address. Edit-
ing the machine switch table requires MTB password or higher. A maximum of 16 machine
switches can be added.