Chapter 9 port configuration, Displaying connection status, Port configuration -1 – SMC Networks TigerAccess SMC7816M User Manual
Page 217: Displaying connection status -1, Port configuration, Hapter, Onfiguration
9-1
C
HAPTER
9
P
ORT
C
ONFIGURATION
Displaying Connection Status
You can use the Port Information or Trunk Information pages to display
the current connection status, including link state, speed/duplex mode,
flow control, and auto-negotiation.
Field Attributes (Web)
• Name – Interface label.
• Type – Indicates the port type. (100BASE-TX, 1000BASE-T, or SFP)
• Admin Status – Shows if the interface is enabled or disabled.
• Oper Status – Indicates if the link is Up or Down.
• Speed Duplex Status – Shows the current speed and duplex mode.
(Auto, or fixed choice)
• Flow Control Status – Indicates the type of flow control currently in
use. (IEEE 802.3x, Back-Pressure or None)
• Autonegotiation – Shows if auto-negotiation is enabled or disabled.
• Media Type
8
– Shows the forced/preferred port type to use for
combination ports 17-18. (Copper-Forced, SFP-Forced,
SFP-Preferred-Auto)
• Trunk Member
– Shows if port is a trunk member.
• Creation
9
– Shows if a trunk is manually configured or dynamically set
via LACP.
8. Port Information only.
9. Trunk Information only.