Displaying mvr interface status, Displaying mvr interface status -24, Figure 16-11 mvr port information -24 – SMC Networks TigerAccess SMC7816M User Manual
Page 420: 24 displaying mvr interface status
M
ULTICAST
F
ILTERING
16-24
Displaying MVR Interface Status
You can display information about the interfaces attached to the MVR
VLAN.
Field Attributes
• MVR Domain – An independent multicast domain.
• Type – Shows the MVR port type.
• Oper Status – Shows the link status.
• MVR Status – Shows the MVR status. MVR status for source ports is
“ACTIVE” if MVR is globally enabled on the switch. MVR status for
receiver ports is “ACTIVE” only if there are subscribers receiving
multicast traffic from one of the MVR groups, or a multicast group has
been statically assigned to an interface.
• Immediate Leave – Shows if immediate leave is enabled or disabled.
• Trunk Member
24
– Shows if port is a trunk member.
Web – Click MVR, Port Information or Trunk Information.
Figure 16-11 MVR Port Information
24. Port Information only.