SMC Networks TigerAccess SMC7816M - Manual (Page 719)

L
INE
P
ROFILE
C
OMMANDS
29-37
Example
The following creates a VDSL line profile named southport.
Related Commands
show lre line-profile (29-77)
lre line-profile
This command applies a line profile to selected VDSL ports. Use the no
form to restore the default settings for the selected ports.
Syntax
[no] lre line-profile profile-name
profile-name – Name of the profile. (Range: 1-31 alphanumeric
characters)
Default Setting
The default profile as specified in RFC 3728.
Command Mode
Global Configuration
Interface Configuration (VDSL Port)
Command Usage
• First create a profile of VDSL configuration settings using the other
commands described in this section, then enter Global Configuration
mode to apply the profile to all VDSL ports on the switch using the
lre line-profile command. Or use the interface command to select a
specific port, and then use the lre line profile command to apply the
settings to that interface.
• The default profile includes all the system default settings for VDSL
lines, and can specified by entering the no lre line-profile command.
Console(config)#line-profile southport
Console(config)#