SMC Networks TigerAccess SMC7816M - Manual (Page 610)

C
LIENT
S
ECURITY
C
OMMANDS
23-22
Related Commands
ip dhcp snooping (23-18)
ip dhcp snooping vlan (23-20)
ip dhcp snooping trust (23-24)
ip dhcp snooping database write
This command writes all dynamically learned snooping entries to flash
memory.
Command Mode
Global Configuration
Command Usage
This command can be used to store the currently learned dynamic
DHCP snooping entries to flash memory. These entries will be restored
to the snooping table when the switch is reset. However, note that the
lease time shown for a dynamic entry that has been restored from flash
memory will no longer be valid.
Example
ip dhcp snooping service-provider-mode
This command converts the address assigned to a host by a DHCP server
to a static entry in the MAC address table, and registers the host as a valid
entry in the DHCP snooping table. Use the no form of this command
disable this feature.
Syntax
[no] ip dhcp service-provider-mode
Default Setting
Disabled
Command Mode
Global Configuration
Console(config)#ip dhcp snooping database write
Console(config)#