SMC Networks TigerAccess SMC7816M - Manual (Page 522)

SNMP C
OMMANDS
21-2
snmp-server
This command enables the SNMPv3 engine and services for all
management clients (i.e., versions 1, 2c, 3). Use the no form to disable the
server.
Syntax
[no] snmp-server
Default Setting
Enabled
Command Mode
Global Configuration
Example
snmp-server
engine-id Sets the SNMP engine ID GC 21-10
show snmp engine-id Shows the SNMP engine ID PE 21-12
snmp-server view Adds an SNMP view GC 21-13
show snmp view Shows the SNMP views PE 21-14
snmp-server group Adds an SNMP group, mapping users to
views GC 21-15
show snmp group Shows the SNMP groups PE 21-16
snmp-server user Adds a user to an SNMP group GC 21-18
show snmp user Shows the SNMP users PE 21-20
Console(config)#snmp-server
Console(config)#
Table 21-1 SNMP Commands (Continued)
Command Function Mode Page