SMC Networks TigerAccess SMC7816M - Manual (Page 418)

M
ULTICAST
F
ILTERING
16-22
Field Attributes
• MVR Domain – An independent multicast domain.
(Range: 1-3; Default: 1)
• MVR Status – When MVR is enabled on both the switch, any multicast
data associated an MVR group is sent from all designated source ports,
and to all receiver ports that have registered to receive data from that
multicast group. (Default: Disabled)
• MVR Running Status – Indicates whether or not all necessary
conditions in the MVR environment are satisfied. (Running status is true
as long as MVR Status is enabled, and the specified MVR VLAN exists.)
• MVR VLAN – Identifier of the VLAN that serves as the channel for
streaming multicast services using MVR. (Range: 1-4094; Default: 1)
• MVR Max Multicast Groups – Shows the maximum number of
multicast groups which can assigned to the MVR VLAN.
• MVR Current Multicast Groups – Shows the number of multicast
groups currently assigned to the MVR VLAN.
• MVR Group IP – IP address for an MVR multicast group.
(Range: 224.0.1.0 - 239.255.255.255; Default: no groups are assigned to
the MVR VLAN)
The IP address range of 224.0.0.0 to 239.255.255.255 is used for
multicast streams. MVR group addresses cannot fall within the reserved
IP multicast address range of 224.0.0.x.
• Count – The number of contiguous MVR group addresses.
(Range: 1-255; Default: 0)