SMC Networks TigerAccess SMC7816M - Manual (Page 770)

VDSL C
OMMANDS
29-88
Example
This example shows how to copy BME firmware for CPEs to a reserved
buffer on the switch, copy this firmware to a remote CPE, and then
activate the new firmware.
Console#show cpe-info 1/16
Protocol ID: Ikanos EOC Protocol
Protocol Version - Major: 01
Protocol Version - Minor: 01
Vendor ID (Value): ffffffff (HEX), -1 (DECIMAL)
Host Application Version: 7.2.5r7IK104012
BME Firmware Version: Firmware-VTU-R:7.2.5r7 Time May 19
2006,
RTOS Nucleus
AFE Hardware Version: AFE<num: ver> <--:-->
IFE Hardware Version: IFE<num:Dev.Rev> <0:a10>
Firmware Number: 2
Active Version: 2
verId 1: NULL
verId 2: 104012IK7.2.5r7
CO Firmware Buffer is empty now <------------
Console#copy tftp firmware
TFTP server IP address: 192.168.1.19
Source file name: 724maccpe
Success.
Firmware size : 485719
Firmware version : 104012IK7.2.4r9_Back_to_Back_Mac
Console#show cpe-info 1/16
Protocol ID: Ikanos EOC Protocol
Protocol Version - Major: 01
Protocol Version - Minor: 01
Vendor ID (Value): ffffffff (HEX), -1 (DECIMAL)
Host Application Version: 7.2.5r7IK104012
BME Firmware Version: Firmware-VTU-R:7.2.5r7 Time May 19
2006,
RTOS Nucleus
AFE Hardware Version: AFE<num: ver> <--:-->
IFE Hardware Version: IFE<num:Dev.Rev> <0:a10>
Firmware Number: 2
Active Version: 2
verId 1: NULL
verId 2: 104012IK7.2.5r7
CO Firmware Buffer version : 104012IK7.2.4r9_Back_to_Back_Mac
<-------
CO Firmware Buffer size : 485719
<-------