SMC Networks TigerAccess SMC7816M - Manual (Page 741)

A
LARM
P
ROFILE
C
OMMANDS
29-59
thresh-15min-sess
This command sets the threshold for Severely Errored Seconds (SESs)
that can occur within any given 15 minutes. Use the no form to restore the
default setting.
Syntax
thresh-15min-sess value
value – Threshold for Severely Errored Seconds.
(Range: 0-900 seconds; 0 disables the threshold)
Default Setting
2
Command Mode
VDSL Alarm Profile
Command Usage
• A Severely Errored Second is a one-second interval containing 18 or
more CRC-8 anomalies, one or more Loss of Signal (LOS) defects,
one or more Severely Errored Frame (SEF) defects, or one or more
Loss of Power (LPR) defects.
• This command sets the threshold for the number of severely errored
seconds within any 15 minute collection interval for performance data.
If the number of severely errored seconds in a particular 15-minute
collection interval reaches or exceeds this value, a
vdslPerfSESsThreshNotification notification will be generated. (Refer
to RFC 3728 for information on this notification message.) No more
than one notification will be sent per interval.
Example
The following sets the SESs threshold to 15.
Console(config-alarm-profile)#thresh-15min-sess 15
Console(config-alarm-profile)#