SMC Networks TigerAccess SMC7816M - Manual (Page 466)

S
YSTEM
M
ANAGEMENT
C
OMMANDS
20-6
show running-config
This command displays the configuration information currently in use.
Command Mode
Privileged Exec
Command Usage
Use this command in conjunction with the show startup-config
command to compare the information in running memory to the
information stored in non-volatile memory.
This command displays settings for key command modes. Each mode
group is separated by “!” symbols, and includes the configuration
mode command, and corresponding commands. This command
displays the following information:
- MAC address for the switch
- SNTP server settings
- SNMP community strings
- Users (names, access levels, and encrypted passwords)
- VLAN database (VLAN ID, name and state)
- VLAN configuration settings for each interface
- Multiple spanning tree instances (name and interfaces)
- IP address
- Layer 4 precedence settings
- Spanning tree settings
- Interface settings
- Any configured settings for the console port and Telnet