SMC Networks TigerAccess SMC7816M - Manual (Page 479)

F
ILE
M
ANAGEMENT
C
OMMANDS
20-19
• Use the partial-running-config keyword to copy basic settings for
the IP configuration, SNMP community strings, and CLI user names
and passwords to a startup configuration file. The system can then be
reset using the parameters copied from the partial-running-config, and
default settings for all other parameters.
• After using the firmware keyword to copy BME firmware for CPEs
to reserved buffer space in the switch, first use the oam remote
upgrade firmware command (page x) to transfer the firmware a
remote CPE, and then use the oam remote firmware active command
(page x) to activate the new firmware.
Example
The following example shows how to download new firmware from a
TFTP server:
The following example shows how to upload the configuration settings to
a file on the TFTP server:
Console#copy tftp file
TFTP server ip address: 10.1.0.19
Choose file type:
1. config: 2. opcode: <1-2>: 2
Source file name: LUVDSL2_Opcode_V3.1.16.20.bix
Destination file name: V311620
\Write to FLASH Programming.
-Write to FLASH finish.
Success.
Console#
Console#copy file tftp
Choose file type:
1. config: 2. opcode: <1-2>: 1
Source file name: startup
TFTP server ip address: 10.1.0.99
Destination file name: startup.01
TFTP completed.
Success.
Console#