SMC Networks TigerAccess SMC7816M - Manual (Page 896)

M
ULTICAST
F
ILTERING
C
OMMANDS
35-20
Command Usage
When the maximum number of groups is reached on a port, the switch
can take one of two actions; either “deny” or “replace.” If the action is
set to deny, any new IGMP join reports will be dropped. If the action
is set to replace, the switch randomly removes an existing group and
replaces it with the new multicast group.
Example
show ip igmp filter
This command displays the global and interface settings for IGMP
filtering.
Syntax
show ip igmp filter [interface interface]
interface
• ethernet unit/port
- unit - Stack unit. (Range: 1)
- port - Port number. (Range: 1-19)
• port-channel channel-id (Range: 1-12)
Default Setting
None
Command Mode
Privileged Exec
Console(config)#interface ethernet 1/1
Console(config-if)#ip igmp max-groups action replace
Console(config-if)#