SMC Networks TigerAccess SMC7816M - Manual (Page 755)

D
ISPLAYING
VDSL I
NFORMATION
29-73
show lre datarate
This command displays the minimum and maximum data rate for
downstream and upstream fast or slow (interleaved) channels.
Syntax
show lre interleave-delay [unit/port]
• unit - Stack unit. (Range: 1)
• port - Port number. (Range: 1-16)
Command Mode
Privileged Exec
Command Usage
• Use this command without the interface parameter to show the data
rate bounds for all VDSL ports on the switch, or with an interface to
display this information for a specific port.
• No bounds are set for the slow channels by default. Bounding data
rates should be set for both the fast and slow channels if operation
may sometimes disable or enable interleaving
Example
This example shows the default data rate bounds.
Related Commands
lre datarate (29-26)
Console#show lre datarate 1/1
Downstream Datarate Fast Max : 200000 kbps
Downstream Datarate Fast Min : 64 kbps
Downstream Datarate Slow Max : 0 kbps
Downstream Datarate Slow Min : 0 kbps
Uptream Datarate Fast Max : 200000 kbps
Uptream Datarate Fast Min : 64 kbps
Uptream Datarate Slow Max : 0 kbps
Uptream Datarate Slow Min : 0 kbps
Console#