SMC Networks TigerAccess SMC7816M - Manual (Page 378)

C
LASS OF
S
ERVICE
14-12
Web – Click Priority, IP Precedence Priority. Select an entry from the IP
Precedence Priority Table, enter a value in the Class of Service Value field,
and then click Apply.
Figure 14-6 IP Precedence Priority
CLI – The following example globally enables IP Precedence service on
the switch, maps IP Precedence value 1 to CoS value 0 (on port 1), and
then displays the IP Precedence settings.
* Mapping specific values for IP Precedence is implemented as an interface configu-
ration command, but any changes will apply to the all interfaces on the switch.
Console(config)#map ip precedence 33-13
Console(config)#interface ethernet 1/1 25-2
Console(config-if)#map ip precedence 1 cos 0 33-14
Console(config-if)#end
Console#show map ip precedence ethernet 1/1
33-19
Precedence mapping status: disabled
Port Precedence COS
--------- ---------- ---
Eth 1/ 1 0 0
Eth 1/ 1 1 0
Eth 1/ 1 2 2
Eth 1/ 1 3 3
Eth 1/ 1 4 4
Eth 1/ 1 5 5
Eth 1/ 1 6 6
Eth 1/ 1 7 7
Console#