SMC Networks TigerAccess SMC7816M - Manual (Page 451)

C
OMMAND
G
ROUPS
18-13
Interface Configures the connection parameters for all
Ethernet ports, aggregated links, and VLANs 25-1
Link Aggregation Statically groups multiple ports into a single logical
trunk; configures Link Aggregation Control
Protocol for port trunks 26-1
Mirror Port Mirrors data to another port for analysis without
affecting the data passing through or the
performance of the monitored port 27-1
Rate Limit Controls the maximum rate for traffic transmitted
or received on a port 28-1
VDSL Configures communication parameters for VDSL
ports on the switch and connected CPEs 29-1
Address Table Configures the address table for filtering specified
addresses, displays current entries, clears the table,
or sets the aging time 30-1
Spanning Tree Configures Spanning Tree settings for the switch 31-1
VLANs Configures VLAN settings, and defines port
membership for VLAN groups; also enables or
configures private VLANs, protocol VLANs, and
QinQ tunneling 32-1
Class of Service Sets port priority for untagged frames, selects strict
priority or weighted round robin, relative weight
for each priority queue, also sets priority for TCP/
UDP traffic types, IP precedence, and DSCP 33-1
Quality of Service Configures Differentiated Services 34-1
Multicast Filtering Configures IGMP multicast filtering, query,
profile, and proxy parameters; specifies ports
attached to a multicast router; also configures
multicast VLAN registration 35-1
Domain Name
Service Configures DNS services. 36-1
DHCP Client and
Relay Configures DHCP client and relay services
(including DHCP Relay Option 82) 37-1
IP Interface Configures IP address for the switch 38-1
Table 18-4 Command Group Index (Continued)
Command Group Description Page