SMC Networks TigerAccess SMC7816M - Manual (Page 284)

VDSL C
ONFIGURATION
10-32
interval reaches or exceeds this value, a vdslPerfLossThreshNotification
notification will be generated. (Refer to RFC 3728 for information on
this notification message.) No more than one notification will be sent
per interval.
• thresh-15min-uass – Threshold for Unavailable Seconds (UASs) that
can occur within any given 15 minutes. (Range: 0-900 seconds, where 0
disables the threshold; Default: 10)
An Unavailable Seconds is a one-second interval during which the
VDSL transceiver is powered up but not available (i.e., not in the
Showtime state). A VDSL line will become unavailable at the onset of
10 contiguous Severely Errored Seconds. Once unavailable, the line
should become available at the onset of 10 contiguous seconds with no
SESs.
This parameter sets the threshold for the number of severely errored
seconds within any 15 minute collection interval for performance data.
If the number of severely errored seconds in a particular 15-minute
collection interval reaches or exceeds this value, a
vdslPerfUASsThreshNotification notification will be generated. (Refer
to RFC 3728 for information on this notification message.) No more
than one notification will be sent per interval.
• thresh-15min-lprs – Threshold for Loss of Power Seconds (LPRs) that
can occur within any given 15 minutes. (Range: 0-900 seconds, where 0
disables the threshold; Default: 10)
This parameter sets the threshold for the number of loss of power
seconds within any 15 minute collection interval for performance data.
If the number of loss of power seconds in a particular 15-minute
collection interval reaches or exceeds this value, a
vdslPerfLprsThreshNotification notification will be generated. (Refer to
RFC 3728 for information on this notification message.) No more than
one notification will be sent per interval.