SMC Networks TigerAccess SMC7816M - Manual (Page 737)

A
LARM
P
ROFILE
C
OMMANDS
29-55
Command Usage
• An Errored Second is a one-second interval containing one or more
CRC anomalies, or one or more Loss of Signal (LOS) or Loss of
Framing (LOF) defects.
• This command sets the threshold for the number of errored seconds
within any 15 minute collection interval for performance data. If the
number of errored seconds in a particular 15-minute collection
interval reaches or exceeds this value, a
vdslPerfESsThreshNotification notification will be generated. (Refer
to RFC 3728 for information on this notification message.) No more
than one notification will be sent per interval.
Example
The following sets the ESs threshold to 25.
thresh-15min-lofs
This command sets the threshold for Loss of Frame seconds (LOFs) that
can occur within any given 15 minutes. Use the no form to restore the
default setting.
Syntax
thresh-15min-lofs value
value – Threshold for Loss of Framing, or the number of seconds
during which there was loss of framing in the indicated time
interval. (Range: 0-900 seconds; 0 disables the threshold)
Default Setting
10
Command Mode
VDSL Alarm Profile
Console(config-alarm-profile)#thresh-15min-ess 25
Console(config-alarm-profile)#